Free DFM Analysis & Free Quote
& On-demand Manufacturing
Try a contact & see what we can help !
In injection molding trial, materials have to be prepared 2-10 hours in advance.
Most of the resin cannot be put into the injection molding machine directly, when for mold trial or injection molding production. Resins need to be dried in an oven for hours so that to be free of moisture. Otherwise, there will be molding issues, especially for cosmetic parts. Besides, most injection molded part will be in a specified molding color. Then we will have the resin mixed with pigment powder or pigment pellet thoroughly.
The video shows the molding master put a resin into an oven, then setting a specified cooking temperature for 4 hours. And also shows how the master mixes the pigment powder with the pellets. For low volume production and rapid tooling, pigment powder is more often used than pigment pellet. It’s more fragile and suitable for on-demand manufacturing. It’s because that if for pellet pigment, there will be MOQ requirement.
Danke Mold can meet the injection molding color with a specified Pantone color, RAL color, or physical samples. There may be some color variance, which normally we would need our customer’s approval before molding production start. For low-volume production, we found a certain material database and some simple color list. It can help our customer deliver early functional prototype quickly and in cost efficiency.
Danke Mold is a high-quality and professional injection molding manufacturer. Would you have any injection molding inquiries, contact us via email@example.com. We will response in 12 hours.