Welcome to Injection Molding & Rapid Prototyping Manufacturer
Prototyping Molding
Production Molding
Blog
Design Tips
Products
Gallery
Glossary
FAQs
Company
Customers' Feedbacks
News
1. Q: Is an injection molding tool needed in advance for quick-turn injection molding?A: Yes, an injection molding tool is needed in advance for quick-turn injection molding. Because of investing an injection molding too needed, our customers often didn’t choose this process for product development. However, the tooling cost is much lower than a production injection mold. At Danke Mold, we can control the tooling cost at a very reasonable low price, so that it will be easier for our customer to start-up.2. Q: How can I get an accurate quick-turn injection molding quote?A: To get an accurate injection molding quote, we would need detailed project information, including: 1) Part material; 2) Surface finishes; 3) Molding color; 4) Acceptable tolerance;5) Batch molding production quantity; 6) Tooling life requirement; 7) Any assembly concerns; 8) Any cosmetic concerns, and etc.If possible, a brief introduction to the manufacturing requirement. As per our experience, sometimes our customer maybe confronted unknow factors. We can provide our professional manufacturing suggestions and solutions. Danke Mold has a standard quotation form. It would not be too much time consuming and would hope our customer can provide the information to us, so that we can provide an accurate and competitive quotation.3. Q: What’s the MOQ requirement of quick-turn injection molding at Danke Mold?A: There is no MOQ requirement of our quick-turn injection molding. You can order tens of, hundreds of, or thousands of parts at every single production. We can also separate the shipment agilely if some of the parts are super urgent needed. We have customers needed as low as 2 pieces after the injection mold made. Anyway, we would suggest 20 pieces or more for molding production. As for small runs of quick-turn injection molding, the cost mostly as the injection molding set up. About the cost of 10 pieces, 20 pieces, 30 pieces, they probably they would not vary a lot.4.Q: What’s the property of the quick-turn injection molding tools?A: The injection molding tools property belongs to our customer. Just for notification, for quick-turn injection molding, we often use MUD mold base or another common mold base, to save our customer’s general cost. The tooling mold base will belong to Danke Mold. If for production mold, the full set of tooling will belong to our customers.5.Q: What I should pay attention to before placing a quick-turn injection molding order, comparing with the common injection molding process?A: We would have some notifications for our customers before placing the order:1) We would like to confirm with our customer if the job can be kicked off right away. 2) If the gate position acceptable? As they may affect the cosmetic.3) If the parting line option acceptable, as they may affect the cosmetic and assembly.4) Have the potential tooling and molding issues been notified?5) As some of the professional terms, if our customers understand the potential issues clearly?6. Q: When we start calculating the lead time of in quick-turn injection molding tooling quotation?A: Normally it starts after the final drawing confirmed as well as purchasing order confirmed. We will start discussing the tool building options, as well as the forecasting molding issues by quick-turn injection molding, so that we could save the lead time for our customers. We will also build a series standard of quick-turn injection molding, so that our customer can understand easily what we meant and also the come-out. For some custom project, we can do a detailed and thorough analysis before tool building start. So that to avoid the miscommunication and molding issues. For our common injection molding services, all tool building start would need through DFM discussions.7. Q: How can I control my quick-turn injection molding project progress?A: My project engineer will have a project progress management form at each quick-turn injection molding job. Our project manager will send weekly update to you for review. If you concern about the progress at anytime, you can also our our project manager to send you the images or videos, for the update of the job.8. Q: What can I do if I want to replace injection molding order with my quick-turn tooling at Danke Mold?A: You can just easily place us an injection molding order with a specified requirement, including quantity needs, molding color, part material and lead time etc. Or you can also contact our project manager to have some upfront discussion in advance before placing an injection molding PO.9. Q: What can I do if I want to modify my quick-turn injection molding tool at Danke Mold?A: You can contact our just contact our project manager with the tooling modification details. Our project managers will check with our tooling engineers if the tools can be modified or not. If yes, our project managers will advise a cost or lead time. If the prototype injection mold is not for modification, we will provide our suggestions or comments.10. Q: What can I do if my quick-turn injection molding part is out of expectation?A: You can contact our project manager right away, or direct contact our general email info@dankemold.com. Our project manager will work closely with you, to analysis the issue. We will provide our professional suggestion and solution to you, for example modify the tool, try other materials, try other molding parameters, to meet agile needs at the product development. We’re customer-oriented and eager to save the cost and lead time for our customers. If in case that the problem is because of Danke Mold, we will take the responsibility actively, and arrange swift solutions for our customers.11. What will Dank Mold do, if my quick-turn injection molding parts with quality issues?A: If with quality issues, we will response within 12 hours and keep you updated of our checking. we will start tracking the production status, including if the material is correct, if the molding process is same as sample approval, is their engineer confirmed with the approval sample before production proceeds, is sample checking record, is there any final checking record, If the issue is because of Danke Mold’s management, Danke Mold will arrange the production for free with our best lead time. If the issue is because of our customer, we will keep optimistic negotiation with our customer for a best, quick-turn, both agreed-with solution. Anyway, Quality is our first priority. Danke Mold is always honest and issues forecasted to our customers. Small run production, our engineer will confirm the sample at production start, our QC will on-site checking, before packaging, we will 100% cosmetic checking, so far we have a very good quality reputation with our customers.12. Q: How is your quick-turn injection molding price at Danke Mold?A: Danke Mold has a very competitive quick-turn injection molding price. Comparing with the USA or Europe, it will be just about 1/3-1/2 of their prices. While even in China, Danke Mold is about 60-80% of the highest ones. Anyway, even no the highest prices, Danke Mold provide the best quick-injection molding services in China from quotation to molding production. And also, our quality and lead time are guaranteed.13.Q: How is your quality control process of quick-turn injection molding?A: Danke Mold has a strict quality control at quick-turn injection molding:1) Unless customer specified, we use only standard materials for quick-turn injection molding. 2) When molding production start, our engineer and QC will inspect the dimensions and check the cosmetic before proceeding. 3) If confirmed, our QC will have a routine process to check the critical dimensions and cosmetic. 4) After molding production and packaging done, we also will have a sample checking at each box to make sure quality guaranteed. We’re quality first, speed matters.14. Q: How long will it take for production if to replace a quick-turn injection molding order at Danke Mold?A: It will take about 3-10 days for the molding production after order confirmation. The lead time covers more than 85% of our projects. It will be including the lead time for molding production, inspection, and packaging. But it does not include the lead time of shipment to our customer. For some job, for example, over-molding, or more than 8 molds at the same project, the production lead time may be about 2-4 days longer.15. Q: How long can I stock my quick turn injection molding tools at Danke Mold?A: In normal, we stock our quick-turn injection molding tool 1 year for our customers. It’s per our existing experience after working with many customers. Mostly the stocking time will be enough for market development. We’re also fragile if our customers would like to stock the tool longer. After one year, we would ask our customer if we could scrap the tool. If the answer is no, we will be glad to negotiate with our customers. If for more than 1 year longer, we would charge about 20 USD per month for the stocking fee.16. Q: What can I do if I need higher volume production after quick-turn injection molding?A: You can just simply email our project manager of quick-turn injection molding. Comparing with the production molds, the tooling structure would be much flexible at rapid tooling. If we proceed to production mold, probably we would have to review the part structure and provide professional part design suggestions. So that the part would be suitable for production mold making and high-volume injection molding.17. Q: Besides quick-turn injection molding, what quantity Danke Mold can help at plastic injection molding?A: Besides plastic injection molding, Danke Mold can help volume production up to 250,000 parts, with competitive price, stable quality, and friendly service. We provide production mold with harden steel and multi cavities. At Injection molding, our day and night shift injection molding production arrangement can meet high monthly volume requirement. We have a SOP document for each high volume injection molding and a strict quality control process to guarantee the part quality.
A: Yes, an injection molding tool is needed in advance for quick-turn injection molding. Because of investing an injection molding too needed, our customers often didn’t choose this process for product development. However, the tooling cost is much lower than a production injection mold. At Danke Mold, we can control the tooling cost at a very reasonable low price, so that it will be easier for our customer to start-up.
A: To get an accurate injection molding quote, we would need detailed project information, including: 1) Part material; 2) Surface finishes; 3) Molding color; 4) Acceptable tolerance;5) Batch molding production quantity; 6) Tooling life requirement; 7) Any assembly concerns; 8) Any cosmetic concerns, and etc.If possible, a brief introduction to the manufacturing requirement. As per our experience, sometimes our customer maybe confronted unknow factors. We can provide our professional manufacturing suggestions and solutions. Danke Mold has a standard quotation form. It would not be too much time consuming and would hope our customer can provide the information to us, so that we can provide an accurate and competitive quotation.
A: There is no MOQ requirement of our quick-turn injection molding. You can order tens of, hundreds of, or thousands of parts at every single production. We can also separate the shipment agilely if some of the parts are super urgent needed. We have customers needed as low as 2 pieces after the injection mold made. Anyway, we would suggest 20 pieces or more for molding production. As for small runs of quick-turn injection molding, the cost mostly as the injection molding set up. About the cost of 10 pieces, 20 pieces, 30 pieces, they probably they would not vary a lot.
A: The injection molding tools property belongs to our customer. Just for notification, for quick-turn injection molding, we often use MUD mold base or another common mold base, to save our customer’s general cost. The tooling mold base will belong to Danke Mold. If for production mold, the full set of tooling will belong to our customers.
A: We would have some notifications for our customers before placing the order:1) We would like to confirm with our customer if the job can be kicked off right away. 2) If the gate position acceptable? As they may affect the cosmetic.3) If the parting line option acceptable, as they may affect the cosmetic and assembly.4) Have the potential tooling and molding issues been notified?5) As some of the professional terms, if our customers understand the potential issues clearly?
A: Normally it starts after the final drawing confirmed as well as purchasing order confirmed. We will start discussing the tool building options, as well as the forecasting molding issues by quick-turn injection molding, so that we could save the lead time for our customers. We will also build a series standard of quick-turn injection molding, so that our customer can understand easily what we meant and also the come-out. For some custom project, we can do a detailed and thorough analysis before tool building start. So that to avoid the miscommunication and molding issues. For our common injection molding services, all tool building start would need through DFM discussions.
A: My project engineer will have a project progress management form at each quick-turn injection molding job. Our project manager will send weekly update to you for review. If you concern about the progress at anytime, you can also our our project manager to send you the images or videos, for the update of the job.
A: You can just easily place us an injection molding order with a specified requirement, including quantity needs, molding color, part material and lead time etc. Or you can also contact our project manager to have some upfront discussion in advance before placing an injection molding PO.
A: You can contact our just contact our project manager with the tooling modification details. Our project managers will check with our tooling engineers if the tools can be modified or not. If yes, our project managers will advise a cost or lead time. If the prototype injection mold is not for modification, we will provide our suggestions or comments.
A: You can contact our project manager right away, or direct contact our general email info@dankemold.com. Our project manager will work closely with you, to analysis the issue. We will provide our professional suggestion and solution to you, for example modify the tool, try other materials, try other molding parameters, to meet agile needs at the product development. We’re customer-oriented and eager to save the cost and lead time for our customers. If in case that the problem is because of Danke Mold, we will take the responsibility actively, and arrange swift solutions for our customers.
A: If with quality issues, we will response within 12 hours and keep you updated of our checking. we will start tracking the production status, including if the material is correct, if the molding process is same as sample approval, is their engineer confirmed with the approval sample before production proceeds, is sample checking record, is there any final checking record, If the issue is because of Danke Mold’s management, Danke Mold will arrange the production for free with our best lead time. If the issue is because of our customer, we will keep optimistic negotiation with our customer for a best, quick-turn, both agreed-with solution. Anyway, Quality is our first priority. Danke Mold is always honest and issues forecasted to our customers. Small run production, our engineer will confirm the sample at production start, our QC will on-site checking, before packaging, we will 100% cosmetic checking, so far we have a very good quality reputation with our customers.
A: Danke Mold has a very competitive quick-turn injection molding price. Comparing with the USA or Europe, it will be just about 1/3-1/2 of their prices. While even in China, Danke Mold is about 60-80% of the highest ones. Anyway, even no the highest prices, Danke Mold provide the best quick-injection molding services in China from quotation to molding production. And also, our quality and lead time are guaranteed.
A: Danke Mold has a strict quality control at quick-turn injection molding:1) Unless customer specified, we use only standard materials for quick-turn injection molding. 2) When molding production start, our engineer and QC will inspect the dimensions and check the cosmetic before proceeding. 3) If confirmed, our QC will have a routine process to check the critical dimensions and cosmetic. 4) After molding production and packaging done, we also will have a sample checking at each box to make sure quality guaranteed. We’re quality first, speed matters.
A: It will take about 3-10 days for the molding production after order confirmation. The lead time covers more than 85% of our projects. It will be including the lead time for molding production, inspection, and packaging. But it does not include the lead time of shipment to our customer. For some job, for example, over-molding, or more than 8 molds at the same project, the production lead time may be about 2-4 days longer.
A: In normal, we stock our quick-turn injection molding tool 1 year for our customers. It’s per our existing experience after working with many customers. Mostly the stocking time will be enough for market development. We’re also fragile if our customers would like to stock the tool longer. After one year, we would ask our customer if we could scrap the tool. If the answer is no, we will be glad to negotiate with our customers. If for more than 1 year longer, we would charge about 20 USD per month for the stocking fee.
A: You can just simply email our project manager of quick-turn injection molding. Comparing with the production molds, the tooling structure would be much flexible at rapid tooling. If we proceed to production mold, probably we would have to review the part structure and provide professional part design suggestions. So that the part would be suitable for production mold making and high-volume injection molding.
A: Besides plastic injection molding, Danke Mold can help volume production up to 250,000 parts, with competitive price, stable quality, and friendly service. We provide production mold with harden steel and multi cavities. At Injection molding, our day and night shift injection molding production arrangement can meet high monthly volume requirement. We have a SOP document for each high volume injection molding and a strict quality control process to guarantee the part quality.
Submit your drawing files
and tell us your requirement
Danke Mold team will reply you within
12-24 hours
Tel：0760-88280 9620
WeChat ID : dankemold
Our Addrress
No.8 Zhanxing Road, Dahuan Vllage,
The Torch Development Zone,
Zhongshan City, Guangdong Province
China 528437
Contact Us
Call us on:
+86 181 2536 1623
+86 760 8828 9620
Email us:
General : info@dankemold.com
Sales Engineer: Jade Du
Email: jade@dankemold.com
Skype: Jadedym
