Welcome to Injection Molding & Rapid Prototyping Manufacturer
Prototyping Molding
Production Molding
Blog
Design Tips
Products
Gallery
Glossary
FAQs
Company
Customers' Feedbacks
News
Anodizing is an electrochemical process that forms an oxide layer on aluminium part surface, leading to better corrosion and wear resistance.
Is a conversion coating for stainless steel, copper and copper based alloys, zinc, powdered metals, and silver solder. It is used to add mild corrosion resistance, for appearance and to minimize light reflection
A surface finish that produced by polishing the metal with a 120–180 grit sand paper, belt or wheel. Commonly works for stainless steel, aluminium and nickel.
A surface finish that transparent with glossy, or original color of an object like clear anodizing.
A stamping process for producing raised or sunken designs or relief in sheet metal. It is often combined with foil stamping to create a shiny, 3D effect.
A translucent with sand blasted texture finish on the part surface.
is an optical property which indicates how well a surface reflects light in a specular (mirror-like) direction. It is one of important parameters that are used to describe the visual appearance of an object.
A manufacturing process, produce a pattern of straight, diamon or crossed lines on the parts surface, usually by lathe.
A marking technique that using laser beam impinges on the material, creating the customized on the part surface. The resulting mark is permanent and very resistant to abrasion.
The original/natural surface finish that comes out of machining.
Is the practice of applying paint, pigment, color or other medium to a solid surface (support base).
The Pantone Color Matching System is largely a standardized color reproduction system. By standardizing the colors, different manufacturers in different locations can all refer to the Pantone system to make sure colors match without direct contact with one another.
Is the process of creating a smooth and shiny surface by rubbing it or using a chemical action, leaving a surface with a significant specular reflection.
A finishing operations that involves applying a coating of metal over a base metal substrate to give various desirable properties to the component.
Powder coating is an surface treatment of applying a protective and decorative finish to a wide range of metal materials and products that are used by both industry and private consumers.
Is the measure of the finely spaced micro-irregularities on the surface texture which is composed of three components, namely roughness, waviness, and form. Ra is commonly used to indicate the level of surface roughness
Is the act or process of smoothing or polishing a surface with sandpaper or sand.
is the operation of forcibly propelling a stream of abrasive material (usually sand or bead) against a surface under high pressure to smooth a rough surface, roughen a smooth surface, or remove surface contaminants.
This silky, low-sheen, smooth paint finish actually retains its pearl-like sheen when dry. A satin finish reflects more light than matte and stands up well to washing.
Is the nature of a surface as defined by the three characteristics of lay, surface roughness, and waviness. It comprises the small, local deviations of a surface from the perfectly flat ideal (a true plane).
Is a method of polishing plastics to reduce the surface roughness or improve transparency in plastic, like when plastic is used to make a lightweight optical quality lens.
Submit your drawing files
and tell us your requirement
Danke Mold team will reply you within
12-24 hours
Tel:0760-88280 9620
WeChat ID : dankemold
Our Addrress
No.8 Zhanxing Road, Dahuan Vllage,
The Torch Development Zone,
Zhongshan City, Guangdong Province
China 528437
Contact Us
Call us on:
+86 181 2536 1623
+86 760 8828 9620
Email us:
General : info@dankemold.com
Sales Engineer: Jade Du
Email: jade@dankemold.com
Skype: Jadedym